Floors, showers, backsplashes, large-format panels, and natural stone — installed dead-level, fully waterproofed where it counts, and built to industry standard by a CTI certified tile installer serving Denver and the suburbs.
Tile installation in Denver is the craft Divine Design was built on. Owner Matt Taylor has been setting tile since 2004, and as a CTI certified tile installer (#2038), every floor, shower, and backsplash we install meets the published standards of the tile industry — the TCNA Handbook and ANSI specifications that separate professional work from the kind that fails in a few years.
We're family owned and operated, fully licensed, and fully insured. From a single mosaic accent to a 1,000-square-foot floor or a fully waterproofed custom shower, you get the same certified hands and the same quality-first promise: only top-quality materials, proper substrate prep, and grout lines so straight they look effortless.
Behind a beautiful tiled shower is a precise sequence: spread the mortar, comb it out to full coverage, press each tile into the bed, and check it dead-level before the thinset grabs. Done right, it lasts decades. Here's the motion that makes it happen — tile by tile, level every time.
If it's tile or stone, we set it — on floors, walls, and everything in between, to the standards that keep it looking flawless for decades.
Porcelain, ceramic, stone, and wood-look tile set dead-level over a properly prepped, uncoupled substrate.
Fully waterproofed shower walls, floors, and niches built to ANSI A118.10 — water stays where it belongs.
Subway, mosaic, herringbone, and large-format backsplashes laid out to align cleanly around every outlet.
GPTP-certified installation of oversized gauged porcelain panels most installers can't handle.
Marble, travertine, slate, and granite tile, set and sealed with the care natural stone demands.
Tiled fireplace surrounds, mantels, accent walls, and custom mosaic features that make a statement.
Radiant heated tile floors — one of the best surfaces for warmth in a Colorado bathroom or entry.
Cracked tile, failing grout, or a job gone wrong from another contractor — diagnosed and rebuilt to standard.
A flawless tile job isn't just the tile you see — it's the prep, materials, and detailing underneath that decide whether it lasts two years or twenty.
We flatten and correct the substrate before any tile goes down — the single biggest factor in a lippage-free, lasting floor.
The right trowel, the right mortar, and back-buttering when needed — so there are no hollow spots waiting to crack.
ANSI-standard waterproofing in wet areas and movement joints per TCNA so Colorado's swings don't crack your tile.
Organized, communicative, and clean — you always know what's happening in your home.
We measure, listen, and provide an honest, detailed quote — no obligation.
Choose tile, layout, and grout so the design is locked before work starts.
Substrate correction, membrane, and protection — the part that makes it last.
Certified tile work, dead-level, with crisp and consistent grout lines.
We review every detail together — done only when you're fully happy.
A sample of tile installations across the Denver metro.
Whatever you're searching for, Divine Design covers it — floors, showers, backsplashes, and stone, throughout the Denver metro.
Longevity comes from the layers you can't see. A flat, properly prepared substrate, correct mortar coverage behind every tile, an uncoupling membrane to absorb substrate movement, movement joints per TCNA guidance, and proper waterproofing in wet areas are what keep tile from cracking or coming loose. We build to TCNA and ANSI standards on every job.
It depends on what's there and its condition. Some surfaces can be tiled over with the right preparation, while others must be removed so the substrate can be properly prepped. We assess the existing floor and recommend the approach that gives the most reliable, longest-lasting result rather than the fastest one.
We install porcelain, ceramic, natural stone, glass, mosaic, and large-format gauged porcelain panels (GPTP) on floors, walls, showers, backsplashes, fireplaces, and feature walls. As a GPTP-certified installer, we're equipped to handle the oversized thin panels that most installers can't.
We start by flattening the substrate, then use the correct trowel and mortar for the tile size to achieve full coverage. Careful back-buttering, leveling systems where appropriate, and constant checking keep lippage — the uneven ridge between tiles — within tight tolerances. With large-format tile especially, substrate flatness is everything.
Often, yes. We can repair cracked tiles, regrout failing joints, and source matching or complementary tile when an exact match is discontinued. For repairs, we diagnose why the original failed first — because replacing tile without fixing the underlying cause only leads to it happening again.
Yes. Divine Design holds CTI (Certified Tile Installer) certification #2038 and is GPTP certified, contractor licensed, and fully insured. CTI is earned through a demanding written and hands-on exam, and very few installers carry it.
Get a free, no-pressure estimate from a CTI certified tile installer. Matt will personally review your project.
Request Your Free Estimate